We are seeking a Senior Inspector for our Transportation-Construction management (T-CM) Practice in Fort Lauderdale, FL. As a Senior Inspector you will observe the contractors work to determine the progress and quality of work on construction projects.       Essential Functions: - Identify discrepancies, report significant discrepancies to supervisor, and direct the Contractor to correct such observed discrepancies - Work independently, under general supervision, exercising advanced judgment in the application of standard methodologies and procedures for complex projects - Perform highly complex technical assignments in field surveying and construction layout, making, and checking engineering computations - Inspecting construction work and conducting field tests and is responsible for coordinating and managing lower level inspectors - Reads and interprets contract documents (plans and specifications) to determine if the contractor’s work is in substantial compliance with the contract documents. May make and/or check engineering computations - Maintains detailed accurate records of the Contractor’s daily operations and of significant events that affect work - Inspect construction work - Perform sampling and field testing of component materials and completed work in accordance with the Construction Contract documents - Guide junior inspectors, as needed or directed - Some travel may be required Minimum Qualifications: - High School diploma or equivalent - Minimum of 7 years relevant experience - Prior experience in construction inspection, including exposure to bridge and/or roadway construction inspection, or a Civil Engineering degree with the ability to earn additional required qualifications within one year - Must have materials sampling and testing certifications as required by the scope of work of the project - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Qualifications/Certifications: - ACI Level 1 - CTQP Concrete Field Level 1 - CTQP Earthwork Level 1 and 2 - CTQP Paving level 1 and 2 - CTQP Final Estimates Level 1 - MOT intermediate or above - NPDES Stormwater Inspector  If this sounds like the role for you and you're ready to join an amazing team, please apply.  #LI-SP1 Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

We are seeking an Assistant Resident Engineer for our Transportation-Construction Management team in the Asheville, NC area. The Assistant Resident Engineer has a can-do attitude and is a self-starter and problem-solver; responsible for helping with the firm's Construction Engineering Inspection Services. You will help grow and develop staff and work closely with clients, engineers, and sub consultants to ensure their needs are met. You will also be involved in business planning, marketing, and fulfillment of the firm’s strategic vision for the construction services program. Also operating as an Assistant Resident Engineer, you must have the experience and proven ability to manage Project Engineers and Construction Engineering Inspection (CEI) teams for road and bridge transportation projects. Additional job duties include implementing quality assurance procedures, preparing and submitting estimates, checking engineering calculations, interpreting contract documents, and planning and organizing the work of subordinate and staff members while continually developing and reviewing policies, practices, methods, and procedures of a professional work environment.   Qualifications: -  4+ years’ experience in Federally Funded Heavy Highway Construction Inspection and Contract Administration -  Excellent oral and written communication skills -  Experience working with contractors to resolve issues dealing with contract conformance disagreements - Extensive experience with traffic control plans and MHT reviews as well as inspection of major traffic realignments on major highway systems with lane closure restrictions - Completion of state DOT traffic inspection certification requirements, or equivalent certification from another state - Willingness to work weekends, nights, and swing shifts - Experience with constructing submittal review, change order development and cost analysis, construction schedule review, RFI review and coordination, and general contract administration for federally funded state transportation projects - Willingness to work weekends, nights, and swing shifts - Must have a valid driver's license with a good driving record - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds Preferred Qualifications: - Bachelor’s degree in Civil Engineering from an ABET-accredited university - Licensed Professional Engineer in applicable position location or the ability to obtain license within 6 months - Experience with NCDOT - Project Engineer experience Benefits for Full-Time Associates: - 9 paid holidays - Minimum of 10 days of PTO - 10 days of Personal Leave - Paid parental leave - 401K options with stock match & supplemental contributions - Medical and Dental - Click Here for Full Benefits Information #LI-KZ1 Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

We are seeking Senior CEI Inspectors for our Transportation-Construction Management (T-CM) team in the Sarasota and Ft Myers, FL areas.    As a Senior CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents.  The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.   Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor the work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks - Manage the team of inspectors, coordinate their schedules, and oversee their work and records  Qualifications: - HS Diploma or equivalent - 8+ years of construction experience with 4+ years in roadway/bridge inspection or a Civil Engineering degree and 3 years of road and bridge construction engineering and inspection experience - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Certifications / Credentials: - OSHA 10 Hour - FDOT Certifications Benefits: - Paid holidays - Paid vacation and sick time - 401K - Medical, dental, and vision coverage - Pet insurance - Plus, much more   If this sounds like the role for you and you're ready to join an amazing team, please apply.

We are currently seeking a Senior Construction Inspector for the Transportation-Construction Management team in the Detroit, MI area.      As a Senior Construction Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and special provisions for the construction contract. The ideal candidate will possess strong communication skills, be a team player, is enthusiastic, motivated, honest, and dependable.   Responsibilities will include but not be limited to: - Maintain detailed records of the contractor’s daily operations and events that affect the work, monitoring, and inspecting contractor’s work zone traffic control plan as well as reviewing modifications to the plan. - Perform sampling and testing of component materials and completed work in accordance with the construction contract - Prepare and check engineering computations - Inspect the construction work and conduct field tests - Manage the team of inspectors (coordinate their schedules, etc.) - Ability to mentor and manage others on the team along with complex construction projects   Qualifications: - HS Diploma or equivalent - 6+ years of construction experience with 3+ years in inspection or a Civil Engineering degree and 2 years of road and bridge construction engineering and inspection experience. - Valid Driver’s License and a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds     Preferred Certifications / Credentials: - OSHA 10 Hour - MDOT Certifications - ACI level 1 - Nuclear Gauge and Hazmat Safety Training   Benefits: - Holiday Pay - Paid Time Off - 401K - Medical, Dental, and Vision coverage options - Pet Insurance plus much much more   If this sounds like the role for you and you're ready to join an amazing team, please apply.

We are seeking CEI Inspectors for our Construction Management team in the Sarasota and Ft Myers, FL areas.      As a CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents.  The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.   Responsibilities include but are not limited to:   - Maintaining detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks   Qualifications:   - HS Diploma or equivalent - 4 plus years of experience in CEI - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds   Preferred Certifications / Credentials:   - OSHA 10 Hour - ACI Certification - CTQP Certifications   Benefits:   - Paid Holidays, Vacation, and Sick Leave - 401K - Medical, Dental, Vision plans - Pet Insurance #LI-KZ1

We are seeking Civil Field Engineering/CEI Inspectors for our Transportation-Construction Management team in Dallas, TX.     As a Civil Field Engineering/CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents on road and bridge construction projects. To be successful in this position you will possess strong communication skills, and be a team player who is enthusiastic, motivated, honest, and dependable.    Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks Qualifications: - Degree in Civil Engineering, Construction Management, Construction Engineering, Engineering Management, or a related field from a ABET accredited university - Ability to read and interpret construction plans and specifications - Strong written and verbal communication skills - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist, or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Qualifications: - Prior internship or related experience - EIT Certification - DOT Certifications - OSHA 10 Certification Benefits for Full-Time Associates: - 9 paid holidays - Minimum of 10 days of PTO - 10 days of Personal Leave - Paid parental leave - 401K options with stock match & supplemental contributions - Medical and Dental - Click Here for Full Benefits Information #LI-KZ1 #LI-KZ1 Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

We are seeking a Senior CEI Inspector for our Transportation-Construction Management (T-CM) team in the Chicago, IL area.      As a Senior Construction Engineering Inspection (CEI) Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents. The ideal candidate will possess strong communication skills, be a team player, and is enthusiastic, motivated, honest, and dependable.    Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks   Qualifications: - HS Diploma or equivalent - 8+ years of construction experience with 4+ years in roadway/bridge inspection or a Civil Engineering degree and 4 years of road and bridge construction engineering and inspection experience - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds   Preferred Qualifications: - DOT Certifications - OSHA 10 Certification   Benefits: - Holiday Pay - Paid Time Off - 401K - Medical and Dental - Pet Insurance and much much more!   #LI-KZ1 If this sounds like the role for you and you're ready to join an amazing team, please apply.

We are seeking a Senior CEI Inspector for our Construction Management team in the Jacksonville, FL area. As a Senior CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents for road and bridge projects.  The ideal candidate will possess strong communication skills, be a team player, is enthusiastic, motivated, honest, and dependable.     **Along with your resume, please provide a project list that includes your role on each project and the project construction value.**   Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor the work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and contractor’s completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks Qualifications: - High School diploma or equivalent - Minimum of 4 years relevant experience - Prior experience in construction inspection, including exposure to bridge and/or roadway construction inspection, or a Civil Engineering degree with the ability to earn additional required qualifications within one year - Must have materials sampling and testing certifications as required by the scope of work of the project - Ability to sit, stand, climb, bend, twist, or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Certifications / Credentials: - OSHA 10 Hour - ACI - CTQP Certification   Benefits for Full-Time Associates: - 9 paid holidays - 10 days of Vacation - 10 days of Personal Leave - Paid parental leave - 401K options with stock match & supplemental contributions - Medical, Dental, Vision coverage, and much much more!   An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.   Please view Equal Employment Opportunity Posters provided by OFCCP here.   Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

We are seeking Senior CEI Inspectors for our Transportation-Construction Management (T-CM) team in the Charleston, SC area.    As a Senior CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents.  The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.   Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor the work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks - Manage the team of inspectors, coordinate their schedules, and oversee their work and records  Qualifications: - HS Diploma or equivalent - 8+ years of construction experience with 4+ years in roadway/bridge inspection or a Civil Engineering degree and 3 years of road and bridge construction engineering and inspection experience - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Certifications / Credentials: - OSHA 10 Hour - SCDOT Certifications Benefits: - Paid holidays - Paid vacation and sick time - 401K - Medical, dental, and vision coverage - Pet insurance - Plus, much more   If this sounds like the role for you and you're ready to join an amazing team, please apply.

We are seeking CEI Inspectors for our Construction Management team in the Crestview, FL area. As a CEI Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents.  The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.   Responsibilities include but are not limited to: - Maintaining detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks   Qualifications: - HS Diploma or equivalent - 4 plus years of experience in CEI - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds   Preferred Certifications / Credentials: - OSHA 10 Hour - ACI Certification - CTQP Certifications   Benefits: - Paid Holidays, Vacation, and Sick Leave - 401K - Medical, Dental, Vision plans - Pet Insurance - Click Here for Full Benefits Information If this sounds like the role for you and you're ready to join an amazing team, please apply.   An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.   Please view Equal Employment Opportunity Posters provided by OFCCP here.   Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

We are currently seeking a Senior Transportatioin Technician  for the Transportation-Construction Management team in the Raleigh, North Carolina area.    As a Senior Transportation Technician you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and special provisions for the construction contract. The ideal candidate will possess strong communication skills, be a team player, is enthusiastic, motivated, honest, and dependable.   Responsibilities will include but not be limited to: - Maintain detailed records of the contractor’s daily operations and events that affect the work, monitoring, and inspecting contractor’s work zone traffic control plan as well as reviewing modifications to the plan. - Perform sampling and testing of component materials and completed work in accordance with the construction contract - Prepare and check engineering computations - Inspect the construction work and conduct field tests - Manage the team of inspectors (coordinate their schedules, etc.) - Ability to mentor and manage others on the team along with complex construction projects   Qualifications: - HS Diploma or equivalent - 8+ years of construction experience with 4+ years in bridge inspection or a Civil Engineering degree and 4 years of road and bridge construction engineering and inspection experience. - Valid Driver’s License and a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds     Preferred Certifications / Credentials: - OSHA 10 Hour - NCDOT Certifications - ACI level 1 - Nuclear Gauge and Hazmat Safety Training   Benefits: - Holiday Pay - Paid Time Off - 401K - Medical and Dental - Click Here for Full Benefits Information   If this sounds like the role for you and you're ready to join an amazing team, please apply. #LI-KZ1 Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

  We are seeking an Inspector Trainee for our Transportation Construction Management (T-CM) teams in the Virginia Beach area of VA.   This is an entry-level position in which the associate trains under experienced field personnel to learn the concepts of construction observation. This role operates under the supervision of a higher-level engineering technician or engineer. The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.    Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks Qualifications: - HS Diploma or equivalent  - Ability to read and interpret construction plans and specifications - Must have a valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Benefits: - Holiday Pay - Paid Time Off - 401K - Medical and Dental - Click Here for Full Benefits Information   If this sounds like the role for you and you're ready to join an amazing team, please apply.

  We are seeking CEI Inspectors for our Transportation Construction Management (T-CM) teams in the Virginia Beach, VA area. As a Construction Engineering Inspection (CEI) Inspector, you will monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents. The ideal candidate will possess strong communication skills, be a team player, and be enthusiastic, motivated, honest, and dependable.    Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks Qualifications: - HS Diploma or equivalent with 4+ years of construction experience with 2+ years in roadway/bridge inspection OR a Civil Engineering degree - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Flexibility to work nights and weekends as required by the project schedule - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Qualifications: - EIT Certification - VDOT Certifications - VDEQ Certifications - Nuclear Gauge Safety Training - ACI Concrete Testing Technician

We are seeking a Senior Inspector for our Transportation Construction Management (T-CM) team in the Virginia Beach, VA area. As a Senior CEI Inspector, your primary role will be to monitor the contractor's on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents for road and bridge projects. To be an ideal candidate for this position, you should possess strong communication skills, be an enthusiastic and motivated team player, and most importantly, be honest and dependable. **Along with your resume, please provide a project list that includes your role on each project and the project construction value.**   Responsibilities include but are not limited to: - Maintain detailed records of the contractor’s daily operations including manpower, equipment, construction methods, and events that affect the work - Monitor work zone traffic control plan and identify discrepancies and potential issues - Monitor the erosion control plan and identify discrepancies and potential issues - Perform sampling and testing of component materials and completed work - Verify the dimensions of prepared and completed work - Inspect the construction work and conduct field tests - Track/measure completed work quantities for payment - Perform survey checks - Manage the team of inspectors, coordinate their schedules, and oversee their work and records  Qualifications: - HS Diploma or equivalent - 7+ years of construction experience with 4+ years in roadway/bridge inspection OR a Civil Engineering degree and 3 years of road and bridge construction engineering and inspection experience - Ability to read and interpret construction plans and specifications - Must have a Valid Driver's License with a good driving record - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Flexibility to work nights and weekends as required by the project schedule - Ability to sit, stand, climb, bend, twist, or stoop frequently and for prolonged periods, under various outside conditions - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Preferred Qualifications/Certifications: - OSHA 10 Hour - VDOT Certifications - VDEQ Certifications - Nuclear Gauge Safety Training - ACI Concrete Testing Technician

We are currently seeking a Construction Engineer to join our Construction Management team in the Virginia Beach, VA area.   Job Summary: The Field Engineer will help manage the field inspection of roadway and bridge transportation projects, prepare and submit progress and final estimates, check engineering calculations, interpret contract documents, draft engineering solutions in MicroStation for contractors and owners, and oversee contractors to ensure projects are built within reasonable plan and specification conformity.   This position will work on multi-million dollar road and bridge projects for transportation owners, including the Virginia Department of Transportation, with the potential to move up quickly depending on performance. You will work as part of a project-specific team and be part of our growing Virginia Transportation-Construction Management organization. **Along with your resume, please provide a project list that includes your role on each project and the project construction value.**     Minimum Qualifications: - Minimum of 4 years of experience with major road or bridge construction - Bachelor’s degree in Civil Engineering from an accredited university - EIT Certification or the ability to obtain within 6 months - Must obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames - Good verbal and written communication skills required - Valid Driver’s License with a good driving record - Working knowledge of Microsoft Office - Flexibility to work nights and weekends as required by the project schedule - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods of time - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds Preferred Qualifications: - 1 - 3 years of hands-on experience using CADD software, preferably MicroStation, and experience with Highway Design and Work Zone Traffic Control Plans - Experience with Design-Bid-Build, Design-Build, CMGC, and other alternative contract delivery methods - Experience in large, complex transportation construction projects - OSHA 10-hour training - VDOT Certifications - VDEQ Certifications

We are currently seeking a Construction Project Engineer for the Transportation-Construction Management team in the Virginia Beach, VA area. The Construction Project Engineer has a can-do attitude and is a self-starter; responsible for helping with the firm's Construction Engineering Inspection Services.  You will help grow and develop staff and work closely with clients, engineers, and sub-consultants to ensure their needs are met.  You will also be involved in business planning, marketing, and fulfillment of the firm’s strategic vision for the construction services program.   Also operating as a Construction Project Engineer, you must have the credentials and ability to manage Project Engineers and Construction Engineering Inspection (CEI) teams for road and bridge transportation projects.  Additional job duties include implementing quality assurance procedures, preparing and submitting estimates, checking engineering calculations, interpreting contract documents, and planning and organizing the work of subordinate and staff members while continually developing and reviewing policies, practices, methods, and procedures of a professional work environment. **Along with your resume, please provide a project list that includes your role on each project and the project construction value.**   Qualifications:   - Bachelor’s degree in Civil Engineering from an ABET-accredited university - Licensed Professional Engineer in VA or the ability to obtain licensure within 6 months - 10+ years’ experience in Federally Funded Heavy Highway Construction Inspection and Contract Administration - Has acted in the Senior Project Engineer or Project Engineer role for State DOT, on at least two projects - Excellent oral and written communication skills - Experience working with contractors to resolve issues dealing with contract conformance disagreements - Extensive experience with traffic control plans and MHT reviews as well as inspection of major traffic realignments on major highway systems with lane closure restrictions - Completion of state DOT traffic inspection certification requirements, or equivalent certification from another state - Experience with constructing submittal review, change order development and cost analysis, construction schedule review, RFI review and coordination, and general contract administration for federally funded state transportation projects - Valid Driver’s License with a good driving record - Flexibility to work nights and weekends as required by the project schedule - Ability to sit, stand, climb, bend, twist or stoop frequently and for prolonged periods of time - Ability to reach horizontally as well as vertically for required tasks - Ability to use construction or inspection safety equipment including fall protection - Ability to lift and/or move up to 50 pounds     Preferred Qualifications:   - Experience with Design-Bid-Build, Design-Build, CMGC, and other alternative contract delivery methods - Experience in large, complex transportation construction projects Benefits: - Holiday Pay - Paid Time Off - 401K - Medical and Dental - Click Here for Full Benefits Information

We are seeking a Project Controls Specialist for our Construction Management practice nation wide. 100% REMOTE.     Job Summary: - This position creates and/or analyzes schedules that reflect high quality, accuracy, and compliance with contract documents; typically supports projects of large size and/or high complexity. Analysis includes schedule monitoring, identification of drivers, risks, and opportunities. - This position requires independent judgment in evaluation, selection, and adaptation/modification of standard techniques, procedures, and criteria, and must be able to independently solve problems and make decisions. Supervision and guidance mainly concern overall objectives, critical issues, new concepts, and policy matters. Problems faced are difficult and often complex. Essential Functions: - Leads the analysis of prospective (forecasting) and retrospective (forensic) schedule reports. Identify and provide recommendations on process improvement opportunities for future projects. - Creates schedules that reflect high quality, accuracy, and compliance with contract documents. - Leads in-depth schedule monitoring activities, as well as the identification of schedule drivers, risks, and opportunities. - Incorporates change orders and/or claims to critical path method (CPM) with proper logic and relationships. - Prepares procedures and guidelines for scheduling management and control. - Coordinates with procurement team(s) to track and ensure material lead times are incorporated into the project plans. - Plays a key role in the development and implementation of innovative planning and scheduling techniques and methods. - Provides technical guidance and assigns tasks to junior and support staff for project duration. Provides quality assurance. - Performs all other duties as assigned. Minimum Qualifications: - Education: Typically requires a bachelor’s degree in Construction Management, Civil Engineering, or Cost Management or equivalent combination of education and experience. - Experience: Typically requires a minimum of 7 years relevant experience. License/Certification: Knowledge, Skills, and Abilities (KSAs): - Must possess extensive experience in heavy construction and advanced proficiency creating and/or reviewing complex schedules. - Requires extensive experience working with P6, Deltek Acumen Fuse, Microsoft Project, or comparable scheduling tools. - Proven experience leading and/or guiding the work of junior staff. - Must possess strong oral and written communications skills. - Must have the ability to effectively interact with and build strong relationships with clients, customers, contractors, and other key stakeholders. - Must possess strong organization, problem-solving, and prioritization skills. Preferred Qualifications: Physical Demands: - Able to sit and/or stand for prolonged periods of time. Occasionally required to sit and stoop. - Specific vision abilities required by this job. - Subject to environmental conditions. Activities occur inside and outside.   Benefits for Full-Time Associates: - 9 paid holidays - 100% remote work - Minimum of 10 days of PTO - 10 days of Personal Leave - Paid parental leave - 401K options with stock match & supplemental contributions - Medical and Dental - Click Here for Full Benefits Information #LI-KZ1

RS&H is seeking a Graphic Designer to join our Infrastructure Creative Team in our Denver office!       Job Summary: This position performs a variety of creative, design, visualization, and/or multimedia services in support of sales enablement efforts for large to complex projects and/or communications, marketing, and branding. This position ensures adherence with our style guide and brand and production standards. The designer must be a resourceful self-starter, able to work in a collaborative marketing team environment under fast-paced deadlines and meet a high-level of accuracy with the ability to also work independently.    Essential Functions:  - Partners with teams and leaders across the firm to develop design and visual elements for proposals, presentations, marketing collateral, conference collateral, booth and banner design, web/multimedia graphics development, etc. for moderate to complex assignments. - Ensures company's visual components are up to date. Coordinates directly with print vendors. May coordinate, and lead, the planning and/or development of graphics and visual elements across a variety of mediums. - Partners with project, pursuit, business development, and/or communications and marketing teams to recommend, develop, and produce creative solutions and compelling graphics and visual elements. Tailors presentations and visual materials to meet the specific needs of the project. - Develops advanced presentations and complex collateral for special events. May participate in the planning and coordination efforts. - Serves as a trusted advisor and partner to help guide design choices that follow the firm’s style guide, brand standards, and production expectations. - Participates in pursuit, proposal, and/or project teams to understand the needs of the client and project, taking the information shared and creating increasingly complex and compelling visual materials and products. Takes an active role in guiding the plan schedule and timelines. - Manages assignments involving multiple disciplines or team members by coordinating and delegating tasks and ensuring schedules and deadlines are met. - May provide mentorship and guidance to more junior specialists. - Performs all other duties as assigned. Qualifications: - Bachelor’s degree in art, graphic design, or equivalent combination of education and experience. - Minimum of 7 years progressively responsible creative services experience with an online portfolio. - Proficient in the full Microsoft Office Suite, including PowerPoint. - Proficient with the Adobe Creative Cloud suite. - Strong attention to detail, commitment to follow through, and ability to work independently following general direction and oversight from leadership. Also requires the ability to multi-task, prioritize workload, set priorities, and manage multiple projects and assignments. - Must have strong verbal and written communication and interpersonal skills, with the ability to relate to and understand people in a courteous and professional manner. Must possess the ability to build and maintain strong working relationships, demonstrate professional courage, and guide and influence others. Preferred Qualifications:  - A/E/C industry experience - Experience with Adobe After Effects Benefits | Careers | RS&H (rsandh.com)   Typical salary range for this position in Denver, CO is $72,000 to $100,000 and commensurate with experience relative to the position.

We are currently seeking an Electrical Engineer to join our Aerospace & Equipment Design Group in Merritt Island, Florida!     As an associate in RS&H’s Aerospace and Equipment Group, the qualified candidate will work with other RS&H engineers and architects for the design of facilities, infrastructure, and equipment for military, aerospace, and energy projects. Duties will consist of calculations, analyses, creation of system designs, and development of construction documents (drawings and specifications) for launch pads, launch vehicle processing facilities, ground support equipment, military facilities, and large industrial equipment. You will be an integral part of multi-discipline design teams and will coordinate your electrical systems designs with civil, structural, architectural, and mechanical disciplines. Excitement for supporting space exploration is required.   Responsibilities: - Design of and selecting components for electrical control and communication systems for ground support equipment. - Ability to develop block diagrams, cable interconnect diagrams, ground integrated schematics, bill of materials, wire running lists, and build-to-print assembly drawings of control panels, Remote Input/Output (RIO) enclosures, control pendants, and cables assemblies. - Electrical engineering analysis such as sneak circuit, load flow, fault current, arc-flash, and thermal loading. - Review project specifications to assure compliance with customer requirements and create training instructions, and O&M Manuals. - The ability or willingness to learn how to perform the design of electrical power distribution systems, standby power generation and distribution systems, and building systems, including grounding systems, lightning protection systems, lighting systems, fire alarm systems, access control systems, CCTV systems, and telecommunications/data systems is a plus. - Cable tray fill and wire ampacity calculations, feeder and branch circuit sizing calculations, conduit fill, fault analyses; protective device coordination analyses, load flow (voltage drop) analyses; demand load analyses; and other such analyses.    Qualifications: - Bachelor's degree in Electrical Engineering from an ABET accredited college or university or equivalent - Minimum of 8 years of related experience - Working knowledge of AutoCAD and Revit - The ability to understand mechanical and fluids drawings is required. - Intermediate working knowledge of Microsoft Office products - Due to the nature of client projects, US citizenship or permanent legal residency is required   Preferred Qualifications: - Knowledge of federal and military contraction Design Standards and requirements - Working knowledge of Creo - Ability to perform lighting and power calculations using computer-based software - SKM PTW knowledge - Knowledge of hazardous location wiring methodologies following codes and standards is a plus. - Professional Engineer (PE) License, or the ability to obtain Florida PE within one year If this sounds like the role for you and you're ready to join an amazing team, please apply.   Benefits: - Click Here for Full Benefits Information   If this sounds like the role for you and you're ready to join an amazing team, please apply! #LI-HR #electrical #creo #revit Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

RS&H is currently seeking an Intelligent Transportation System Electrical Engineer for our Transportation practice in our Orlando, Jacksonville, or Tampa, FL office! The ITS Electrical Engineer position will include working for the Infrastructure Services group in the following elements of Traffic/ITS engineering:  Qualifications: - Bachelor’s degree in Electrical or Civil Engineering or other professionally recognized equivalent discipline from an accredited university - Professional registration (PE) within the field of electrical engineering in Florida or ability to obtain the PE in Florida within 6-months of hire - Minimum 6 years of experience with electrical design on transportation infrastructure projects (illumination, signalization, tolling, intelligent transportation systems) - Familiarity with communication network topology design - Experience with performing circuit design, voltage drop calculations, and sizing of electrical services - Experience in Freeway or Arterial Management System designs - Experience in working as part of a multi-disciplinary design team - Ability to work independently with general supervision Preferred Qualifications: - Managed/Express lane experience (field devices, tolling, concept of operations, etc.) - Trouble shooting communication equipment - Experience with Florida Department of Transportation design criteria and specifications - Ability to lead/manage production staff in electrical design - Ability to participate in business development, marketing, and client coordination #electrical #LI-HR #ITS #transportation Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.